Concrete – Wikipedia

Workability can be measured by the concrete slump test, a simplistic measure of the plasticity of a fresh batch of concrete following the ASTM C 143 or EN 12350-2 test standards. Workability can also be measured by using the flow table test.

Soil liquefaction – Wikipedia

The phenomenon may incorporate both flow of already liquefied sand from a layer below ground, and a quicksand effect whereby upward flow of water initiates liquefaction in overlying non-liquefied sandy deposits due to buoyancy. "Evaluating cyclic liquefaction potential using the cone penetration test".

Flow table test – Wikipedia, the free encyclopedia

The cone is lifted, allowing the concrete to flow. The flowtable is then lifted up several centimeters and then dropped, causing the concrete flow a little bit further.

Marsh funnel – Wikipedia, the free encyclopedia

… a Marsh cone is a flow cone with an aspect ratio of 2:1 and a working … Cement and Concrete Research vol 35 823-830 “The Marsh Cone: a test or a …

Concrete slump test – Wikipedia, the free encyclopedia

The slump test result is a measure of the behaviour of a compacted inverted cone of concrete under the action of gravity. … and the flow table test …

Grout Flow Cone Test Set – Soil Concrete Cement Asphalt Aggregate …

Click to Enlarge Grout Flow Cone Set. Test set for measuring the flow of grout for preplaced, aggregate concrete. Intended for neat grout and grouts containing fine …

Flowcone.com – Your source for purchasing Polyethylene flow cones …

Polyethylene flow cone for grout testing, same day shipping and overnight available. Order now (386) 871-4177.

ASTM C939 – 10 Standard Test Method for Flow of Grout for …

C939 – 10 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method) , flow cone, grout, preplaced-aggregate concrete, time of …

Cones and Orifices for Grout Flow Cone Tests

Click to Enlarge Grout Flow Cone, 1/2" (13mm) Cast-aluminum flow cone from above set, has 1/2" (13mm) replaceable orifice. Can also accommodate 3/4" (19mm) orifice …

Grout Flow Cones for Concrete Testing – Test Mark Industries

The grout flow cone from Test Mark is used to determine the flow of grout mixtures by measuring the time of efflux of a specified volume of grout from a flow cone.

ASTM C939: Standard Test Method for Flow of Grout for Preplaced …

Download ASTM C939 – Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

Grout Flow Cones

The flow cone is used for measuring the fluidity of grout mixes in the field or laboratory.

Categories: Mining Knowledge Tags: ,

Products Quick Links