Mobile crusher plant

Mobile Secondary Crushers Plant Malaysia

Mobile Secondary Crushers Plant Malaysia

What’s required for the successful execution of high-performance interlinked grow systems? Plants effective at high performance as well as process knowledge — two strong factors of Ciros.

Opening new possibilities along with extremely efficient mobile plants

Feed capability of 500 t/h, as much as seven final products which five comply using the strict standards with regard to asphalt and cement products – and all of this is possible utilizing a mobile plant? While using plant combination from Kelly’s of Fantane within Ireland, Ciros demonstrated what is possible today using mobile plant.

Two. three or several plants could be combined for use within both natural rock quarrying and recycling where possible. The potential result of such grow combinations currently runs from 100 t/h as much as 500 t/h. however the upper limit hasn’t yet been arrived at.

Mobile crushers as well as screen plants are advancing increasingly more into output ranges that up to and including few years back were only feasible using stationary vegetation. Examples such since the plant combination being used at Kelly’s associated with Fantane in Ireland are at the forefront for the long term.

The principle is follows: Interlinked mobile vegetation are crushers as well as screens that work along with each other, and are coordinated when it comes to performance and perform.

Why are interlinked mobile plants gaining popularity?

  • mining enables are undertime constraints
  • better resell value and reusability
  • plants may also be used individually
  • progress produced in stone quarries
  • saves upon cost of staff and transport vehicles

Do you know the potential areas associated with application?

  • in just about all quarries
  • also with regard to small deposits
  • owner offers several auarries
  • various procedure sites

Needs and expectations

  • thanks to today’s technology, mobile plants is capable of final aggregate fractions that was earlier only feasible from stationary plants
  • production availability is on the par with fixed plants

Exactly what does Ciros particularly offer?

  • long-term experience in both mobile and fixed field
  • expertise within the processing of rock and roll and stone
  • an entire mashing programme and screen plants of sizes

Pobile cone crushers

Mobile cone crushers have been part of the extensive selection of crushers from Ciros for several years. The MOBICONE sequence is specially created for secondary and tertiary mashing in hard-stone programs. They are extremely efficient, diverse in application and incredibly economical to make use of.

To meet the actual diverse requirements within processing technology, the MOBICONE plants can be found in different sizes as well as configurations. Whether it’s merely a cone crusher, or additionally with a triple-deck display for closed cycle operation, with various dimension cone crushers or perhaps a double-deck screen as well as oversize return conveyor, Ciros provides a suitable plant for nearly every task.

Numerous applications, a varied product range, along with various size cone crushers, with or without displays, MOBICONE plants cover a sizable range of projects.

MC0 9

The MCO 9 can be obtained with (? S” version) and with no screen unit and may be used either as a second or tertiary mashing plant. Due towards the low total pounds, it is possible to alter locations without great difficulty utilizing a flat-bed trailer.
Additionally, all components in addition to the side discharge conveyors can stick to the plant throughout transportation. This has got the added benefit associated with short setup occasions, al owing with regard to more flexibility whenever moving from website to site, The plants could be loaded using excavators, steering wheel loaders or main crushers.

MCO 11 /MC0 13

The MCO 11 and also the MCO 13 are also available with as well as without screen models, similar to the actual MCO 9. For that MCO 11 Utes or the MCO 13 Utes, an extremely effective triple-deck screen unit can be used, which allows with regard to closed-loop operation as well as produces three last products. Here the display areas are amply chosen – for that MCO 13 S for instance, 2300 x 6000 mm — so large material quantities could be screened efficiently.

Additionally, il ensures how the cone crusher always has got the correct filling level that is particularly important for the caliber of the end item.

With the so-calied., SX” variations, technology also assists you to return the overgrain from the downstream piant. These versions possess a double-deck screen unit having a large run-off chute and may thus produce big quantities of fairly smaller final feed sizes.

The impact crushers in the SNH series tend to be specially developed with regard to secondary crushing as well as guarantee maximum finish product quality.

The actual MOBIFOX mobile effect crushers for supplementary crushing are, as they say, the sister plants from the mobile cone crushers in the MOBICONE series. Whereas they are designed for hard-stone programs, the MOBIFOX is made for soft to medium-hard rock. Similar to the actual mobile cone crushers, the mobile impact crushers will also be available in the most crucial technical configurations. Along with or without display unit, with return conveyor with regard to closed material cycle or with oversize return feed using a downstream screen. Additionally, there are crushers within three different dimensions, depending on the amount requirement and size from the feed material.

The special feature one of the MOBIFOX products may be the impact crusher within the SNH series. Compared to other Ciros effect crushers for main crushing, the SHB or even SHH series, the SNH crushers include a third effect apron, a so-called? milling path”. This impact apron isn’t responsible for mashing the material, but ensures the very important cubicity from the grain size. This way you’ll be able to obtain first-class finish products, which may be used then as high-quality combination for manufacturing cement or asphalt.

The plants within the MOBIFOX series can be found in three different sizes with respect to the quantity requirement and size from the feed material.


Much like all Ciros vegetation, which are created for use in quarries, the MF 12 S also offers a diesel/electric generate concept. The high level of efficiency of this particular concept has caused by very low energy consumption. The drive can be used solely for generating electricity, which consequently generates less support costs and higher availability. In add-on, the diesel engine comes with an elaborate noise-reduced design to be able to meet today’s atmosphere protection requirements.


The MF 14 S is really a reliable mobile supplementary crushing plant that’s used in the actual natural stone business. Specially designed for that requirements in supplementary or tertiary mashing stages in organic stone, it impresses using its high economy as well as availability.

The diesel-electric generate concept also demonstrates its superiority right here. The intelligent control from the plant via PLC guarantees optimal adjustment towards the complete crushing procedure.

Categories: Malaysia Manufacturers Tags: ,

One Response to “ Mobile Secondary Crushers Plant Malaysia ”

  1. Demand:Mobile Crushers | Materials:Wood Chips | Tomas from Lithuania Says:

    Hello I need 2 crushers. One which can do the chips from wood diametre until 200 mm , second the chips will do sawdast 2-3 mm from the wood chips. Capability 4 t per hour.. Motors 7,5 – 11 KW.

Products Quick Links