Single Roll Crusher

FIELDS OFAPPUCATION

Solitary Roll Crushers are utilized for size decrease of products which range from soft to medium-hard.

FEED MATERIALS

Coal, coke, salt, slag, marl, chalk, chemical Gold ore and similar products.

Single roll Crusher with V-belt generate, type 2311/06-05, showcased with crushing ledges

MODEOFOPERATION

The Single Move Crusher carries out size decrease in a wedge-shaped mashing area by stress and shearing tension. The crushing body consists of a rotating move and an flexible and spring-mounted crushing plate on the opposite side. The length between the base from the crushing plate and also the tips of the actual roll crusher’s the teeth determines the flexible gap width, which may be varied depending about the desired product dimension. Any wear and tear which might occur can end up being adjusted via the actual crushing plate. With respect to the feed material and also the desired product dimension, the Roll Crusher has either teeth or even ledges. The crushing plate has a replaceable hair comb plate.

ADVANTAGES

• high as well as constant capacity
• high availability
• long lifetime
• easy alternative of wear as well as spare parts
• wide selection of application
• high decrease ratio
• with no less than fines

SPECIAL FEATURES

The crushing move is firmly fixed onto the bottom frame of the equipment. The crushing bands, shells or ledges, made from a special throwing, are mounted upward or bolted about the roller body associated with welded construction. The actual crusher shaft, made from high-grade steel, is actually arranged in amply-dimensioned round roller bearings. The bearing housings include lubricated labyrinths to prevent dust and grime penetration. To change the gap thickness, the crushing plate is placed by using threaded spindles. The spring components provide initial tension for that crushing force as well as serve simultaneously because overload protection. The equipment can be driven either hydraulically, by belt drive or perhaps a slip-on gear engine.

SCOPEOFAPPLICATION

• feed size:up to approx. 800 mm
• product size:15-150 mm depending on the feed material and its size
• capacity:up to 1000 t/h
• reduction ratio:up to 1:6
• required power:up to 200 kW

Categories: Crushing Equipment Tags: crusher , Feed , plate , roll , Roll Crusher , Solitary Roll Crushers